Wiring diagram for Nitro 700

Started by rgroadglide, May 09, 2010, 10:37:50 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

rgroadglide

I just bought this boat and need a little information. Does anyone have a wiring diagram or know where I can find one. Or I need help identifying a couple of things. 1) I have three wires running from the Deep cycle battery to the front of the boat, I have not taken the front panel appart yet. I have a 12v trolling motor and the depth finder on the front deck. One wire is red and fused, one is orange and fused the other is black (ground) I am wondering what the orange is. I have a blown fuse in the top position and the horn does not work. Every thing else seems to work. Any ideas. Thanks Rich

Dan929CDX

if you go to nitroowners.com, i think you might be able to find one there and if not there then try bassboatcentral.com. Hope this helps.

E5Zero

If you get over to bassboatcentral, look up John Jones of Jones Trolling Motor, he is a guru on stuff like this.
2013 Phoenix 721 ProXP - Merc 250 Pro XS - Motorguide Digital 109
Humminbird 1199c - 1198c - Dual Power Poles
PB Largemouth - 9.51 - Toledo Bend - March 2014

transamzz9

2008 NITRO Z9
250 PRO XS

transamzz9

I know it's hard to read but I can't make it bigger. I you zoom your page up to 200% then it is clear.

If you have factory wiring then this will work for you. ;)
2008 NITRO Z9
250 PRO XS

Brandon Piscitelli

I have a 98' 700lx. The extra wire is for a 12/24V trolling motor setup...kind of a thing of the past.
-Middle River Bass
-Team Outcast

rgroadglide

Thanks to all for your help, just what I needed.

rgroadglide

I have the other wire hooked to the battery, Should I remove it or leave it and will it cause a problem. I only have one battery for the trolling motor. The motor is a 12 volt. Tha nks