04 pro craft 185 livewell set up

[DETT23]

 just got 04 pro craft 185 need some info on how to set up switchs i set to fill with two slide levers put in manul to fill well then switch to auto but it s over flowing into boat . i didnt notice till i tride to get on plane  thanks for any help

[Jared LeBlue]

Not really sure how that is happening. You should have an overflow tube in your well and the water should flow out when it reaches the top of the tube. Look in the well and see if you have the overflow tube in place or some type of overflow system (not real familiar with procrafts set up). If it has an overflow tube then the tube is clogged or the pump is pumping in more water than your over flow can handle. The only way the second scenario can happen is if the previous owner put a larger pump in.

[DETT23]

i cked and there is overflo tube i cked no obstructions but the overflo exit holes are below water line since its gravity overflo seems like this could be part of prob. pumps look ok. I think i am not useing switchs in right positions. cked web could not find any contact numbers for pro craft. thanks for help

[Lawguy513]

I bought a used boat once, and all of the pumpout hoses were clogged with dirtdiver nests, including the bilge!  I have a SP200, and never had any overflow problems, even when the holes sit below the water level.