NEW BOAT PERFORMANCE

Started by bean1187, April 23, 2008, 08:59:32 AM

Previous topic - Next topic

0 Members and 4 Guests are viewing this topic.

bean1187

GUY I JUST BOUGHT MY FIRST BASS BOAT IT IS A 2004 TRITON TR 21X WITH A 250XS NOT THE PRO IT IS THE ONE BUILT BY MERCURY RACING. IT HAS A MANUAL JACK PLAT IM RUNNING A TEMPEST 27 PITCH. WHAT KINDA RPMS AND SPEED SHOULD I BE RUNNING AT WOT. THE GUY I BOUGHT IT FROM IS A TRITON AND MERCURY REP. I ALSO CANT TRIM UP PAST 1/4 WHEN RUNNING HE SAID THAT IS A SAFETY FEATURE ON THE GUARDIAN SYSTEM ON THE MOTOR ANYONE ELSE HAVE THAT TROUBLE OR IT IT SURPOSED TO BE THAT WAY. IVE NEVER SEEN ONE THAT HAS A TRIM LIMIT ON IT BUT THIS IS MY FIRST MERCURY.   PLEASE ADVISE

[attachment deleted by admin]
04 TR 21X  250XS
TAKE THE KIDS THEY ALL THAT MATTER

bassinbill

my 03 triton with same 250xs only trims out a 1/4
BASSINBILL

bean1187

HOW FAST DO YOU RUN AOT WOT AND WHATS YOUR RPMS
04 TR 21X  250XS
TAKE THE KIDS THEY ALL THAT MATTER

bassinbill

it will hit 80 mph at 5900 rpms light load
BASSINBILL

Baxter83

You guys are a little out of my league, but I have a 96' Mercury Xri 175 that only trims out 1/4 way. So mercury must have implemented that safety feature a while back.

I want a 250 :'(. Just not the 60 gallon tank  :shocking:. Unless it will run off moonshine ~shhh.
"If you receive without working, someone else worked without receiving"

"The America Republic will endure until the day Congress discovers that it can bribe the public with the public's money."

TLW

Baxter, yours doesn't have that limit. If both trim rods won't fully extend ya got something wrong........T

Baxter83

Yea, I thought something was wrong myself. I took it to my local marine mechanic (specializes in mercury outboards) and he said everything works the way its supposed to. He even lake tested it. The trim motor turns off after you trim to a certain level while its running. Maybe not that particular limit, but it does keep the motor from trimming all the way. I was told nothing was wrong unless my supposedly 20+ year experienced mechanic needs to be replaced with someone else.
"If you receive without working, someone else worked without receiving"

"The America Republic will endure until the day Congress discovers that it can bribe the public with the public's money."

TLW

#7
Kinda confused. There are no limits that will turn tha motor off (tilt n trim motor). Might be a thermal over load in tha motor but I don't ever recall seein' one.  Maybe whats happenin' is its goin' ta full trim (both small rods fully extended) then changin ta tha big clyinder that will not hold tha motor with power applied. Hope thats makes some kinda sense! Hope ya get it figured out.........T

-Steve-

Quote from: Baxter83 on May 06, 2008, 11:47:41 AM


I want a 250 :'(. Just not the 60 gallon tank  :shocking:. Unless it will run off moonshine ~shhh.

If you prvide me with the moonshine I could do some testing to see if it has a high enough octane level to make it work...a couple gallons would do the trick... ;D ;D ;D
\My Mind is a Library Full of Worthless Information\

Randy G.

nO BOAT BOAT MOTOR REGUARDLESS OF BRAND WILL TRIM OUT ALL THE WAY WHILE RUNNING. iF IT DOES THEN SOMETHING IS WRONG WITH IT.

Coonhound

My TR196 with a 200 EFI Merc will only trim up, while under high power, to the ends of the two small trim rods. The big cylinder won't kick in under running power.
Matt
"People sleep peaceably in their bed at night only because rough men stand ready to do violence on their behalf" Credited to George Orwell
Nervous B's Custom Hand Pours
Pics of Fish