Chatterbait Rod

Started by Bretts_daddy, March 31, 2022, 01:15:45 PM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

Bretts_daddy

Which would make the best chatterbait rod in the Fury series, the 705cd or the 733c?
The only stupid question is the one you don't ask!

No matter how much we know about fishing there is always more to learn!

topdsm0138

#1
I use my 705CB just fine. It's a 7' MH Action. It has just enough "give/action" to where I can set the hook, but don't yank iy out of the fish's mouth. I can also feel the vibration of my bait and it's contact with grass n stru ture, through the handle.

Sent from undisclosed location. -Tiller Mafia
"I'm a simple man, with simple pleasures." -Trevor Belmont

Bretts_daddy

Quote from: topdsm0138 on March 31, 2022, 01:49:33 PM
I use my 705CB just fine. It's a 7' MH Action. It has just enough "give/action" to where I can set the hook, but don't yank iy out of the fish's mouth. I can also feel the vibration of my bait and it's contact with grass n stru ture, through the handle.

Sent from undisclosed location. -Tiller Mafia

How far down does the parabolic bend go before it hits the backbone of the rod? I'm not looking for a rod that will bend like a pretzel, I would like it to have some good give so you don't rip the hook out of the mouth but I want the backbone to be about halfway up or so that it can stiffen up and haul the fish in.
The only stupid question is the one you don't ask!

No matter how much we know about fishing there is always more to learn!

topdsm0138

Quote from: Bretts_daddy on April 01, 2022, 09:56:51 AM
Quote from: topdsm0138 on March 31, 2022, 01:49:33 PM
I use my 705CB just fine. It's a 7' MH Action. It has just enough "give/action" to where I can set the hook, but don't yank iy out of the fish's mouth. I can also feel the vibration of my bait and it's contact with grass n stru ture, through the handle.

Sent from undisclosed location. -Tiller Mafia

How far down does the parabolic bend go before it hits the backbone of the rod? I'm not looking for a rod that will bend like a pretzel, I would like it to have some good give so you don't rip the hook out of the mouth but I want the backbone to be about halfway up or so that it can stiffen up and haul the fish in.
That's honestly about how far the backbone does go up it. We have whats called Snakeheads and Clown Knifefish down south here and I've caught a few on it with no issues.

I'll be honest as this is the first Dobyns Rod I've ever owned, but I was impressed that it had both sensitivity without sacrificing any strength.

Sent from undisclosed location. -Tiller Mafia

"I'm a simple man, with simple pleasures." -Trevor Belmont

Smallie_Stalker

I know you said Fury series but if you are looking to buy and can spare the few extra $$ I'd recommend the Sierra 734C.  I have the Fury 733C and a Boom Boom Champ 705CB, but I throw the majority of my chatterbaits on that Sierra 734C.

Sierras have a slightly slower tip than other series - soft enough tip to keep bass pinned (even on treble baits) but transitions into the backbone just right for fighting and landing fish.
Dobyns Rods   Titan Tungsten   Abu Garcia  Berkley  Pflueger  Spiderwire

Bretts_daddy

Quote from: Smallie_Stalker on April 01, 2022, 12:41:48 PM
I know you said Fury series but if you are looking to buy and can spare the few extra $$ I'd recommend the Sierra 734C.  I have the Fury 733C and a Boom Boom Champ 705CB, but I throw the majority of my chatterbaits on that Sierra 734C.

Sierras have a slightly slower tip than other series - soft enough tip to keep bass pinned (even on treble baits) but transitions into the backbone just right for fighting and landing fish.

I actually have a Fury 734C but was looking for something a little shorter too as this will double as my skipping rod. As for extra money...as soon as daycare started last fall for my littlest boy that evaporated  :(.
The only stupid question is the one you don't ask!

No matter how much we know about fishing there is always more to learn!

chrisD46

I tested both rods - I believe either would work but I found the 705CB to be slightly more limber / softer than the 733 . For the 705CB I would use #30 lb. braid + #15 lb. FC leader while with the 733 I would use straight #15 lb. ~ #17 lb. FC . A lot depends on the amount of cover or open water you will be fishing the chatterbait in .

Dink Dawg

I run a Kaden 735cb for chatterbaits have been more that happy.  This model is very versatile.

Smallie_Stalker

Quote from: Dink Dawg on April 03, 2022, 11:56:21 PM
I run a Kaden 735cb for chatterbaits have been more that happy.  This model is very versatile.
Thanks Doug. I have that rod. If I ever get to fish again I will try them on it.

Sent from my Pixel 6 Pro  using Tapatalk

Dobyns Rods   Titan Tungsten   Abu Garcia  Berkley  Pflueger  Spiderwire

Bretts_daddy

Quote from: chrisD46 on April 02, 2022, 11:19:52 AM
I tested both rods - I believe either would work but I found the 705CB to be slightly more limber / softer than the 733 . For the 705CB I would use #30 lb. braid + #15 lb. FC leader while with the 733 I would use straight #15 lb. ~ #17 lb. FC . A lot depends on the amount of cover or open water you will be fishing the chatterbait in .
Which would be better to double as a skipping rod like under docks, overhangs etc.?
The only stupid question is the one you don't ask!

No matter how much we know about fishing there is always more to learn!

chrisD46

Quote from: Smallie_Stalker on April 01, 2022, 12:41:48 PM
I know you said Fury series but if you are looking to buy and can spare the few extra $$ I'd recommend the Sierra 734C.  I have the Fury 733C and a Boom Boom Champ 705CB, but I throw the majority of my chatterbaits on that Sierra 734C.
*What line type and pound test are you running with your Sierra 734C ?
Sierras have a slightly slower tip than other series - soft enough tip to keep bass pinned (even on treble baits) but transitions into the backbone just right for fighting and landing fish.

Bretts_daddy

Quote from: chrisD46 on April 05, 2022, 06:51:53 AM
Quote from: Smallie_Stalker on April 01, 2022, 12:41:48 PM
I know you said Fury series but if you are looking to buy and can spare the few extra $$ I'd recommend the Sierra 734C.  I have the Fury 733C and a Boom Boom Champ 705CB, but I throw the majority of my chatterbaits on that Sierra 734C.
*What line type and pound test are you running with your Sierra 734C ?
Sierras have a slightly slower tip than other series - soft enough tip to keep bass pinned (even on treble baits) but transitions into the backbone just right for fighting and landing fish.
I saw that too but it didn't answer my question about the rods I was asking about. I answered that a Sierra wasn't in the cards for me as I don't have the extra money but my original question between the 733c and 705cb wasn't answered by Smallie Stalker.
The only stupid question is the one you don't ask!

No matter how much we know about fishing there is always more to learn!

loomisguy

Of those 2 the 733.  Personally I like a shorter rod and would go with the 703. The whole" pulling hooks out " thing has gotten to be a internet fallacy especially with a chatterbait. The Jackhammer has a stout hook in it. It's a lot more like fishing a swimjig that a crankbait.
They will get behind it and push it but no rod is going to make up for that maneuver.

Dink Dawg

I totally agree with loomisguy. The issue was the bait tearing away from grass and the goal was to slow the bait down once it came free. There is some validity to loosing fish on a chatter bait because the lead head is allowed to swivel from the connection to the blade and snap.  Fish can pivot the bait once hooked.  The goal is to mitigate those two factors yet have the power to drive a large diameter hook in hard tissue.  I started with a 734C, transitioned to the 736CB glass but found the Kaden 735CB more responsive. Just for context, I throw a 1/2 ounce in most situations and a 3/8 only occasionally.  Just my thoughts.

chrisD46

You will most likely be more precise with casts for skipping under docks , over hangs, etc. using a 7' rod versus a 7'3" rod . You can't go wrong with a Fury 705CB (very versatile) using either braid , co-poly or FC main line (will depend on your reaction time , how hard you set the hook , hook up percentage , etc. when using a chatterbait) . Later you may find a more specific chatterbait rod you like better (more $$) but a Fury 705CB will ALWAYS have a spot in your line up to be used with various crank baits and other treble hook lures making the Fury 705CB a good value and one of Dobyns most popular rods . I have Sierra 733C , 734C , & 735C and when I can find a Fury 705CB on sale it will be coming home with me (again due to it's versatility) .

ohiobass

DC 733C.....OR SA 734C. I own both, and they both work very well with spinnerbaits & chatterbaits up to 1/2 oz. The Sierra 734 is a "tad" more parabolic/moderate in action than the DC 733C.