Nitro Z7 Livewell

Started by bob4360, April 12, 2010, 06:55:16 PM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

bob4360

Sounds silly, but can some experienced 2010 Z-7 owner tell me how to operate the livewell system?  Mine's got a push-in/pull out valve of some type in the starboard livewell, but I'm not sure how to use it.  The owner's manual shows a different type of exterior switch to open/close the valve.  Thanks.

E5Zero

Bob welcome aboard.  Here is a link to Bass Boat Central regarding the Z-7 livewell in a 2009.  I have the 2008 and it confuses me as well.  Hope this helps out.

http://bbcboards.zeroforum.com/zerothread/505904-2009-z-7-livewell-question
2013 Phoenix 721 ProXP - Merc 250 Pro XS - Motorguide Digital 109
Humminbird 1199c - 1198c - Dual Power Poles
PB Largemouth - 9.51 - Toledo Bend - March 2014

Buzbait88

Sounds like a pump out system.  Pull it out and and it pumps the water out push it in and it recirculates.  I would try that.  I had 1 in my champion, but don't remember for sure if it was pushed in/pumps out or vice versa. 
THE VIBRASHOCK IS BACK!!
KaRu Lures
KaRu Facebook

E5Zero

2013 Phoenix 721 ProXP - Merc 250 Pro XS - Motorguide Digital 109
Humminbird 1199c - 1198c - Dual Power Poles
PB Largemouth - 9.51 - Toledo Bend - March 2014

canyonman

Don't forget to put the drain plug in the livewell also, easily overlooked.

britt

On tournament days I will run the aerator on auto, and while running from hole to hole flip the recirc on (with the valve pulled out/pump out).  When the water pushes into the upper 90's, I have found this to be a very effective way to avoid any dead fish.