Check out these Skeeter trailer side lights

[theBaitBar]

I made these or a member of a different site and thought you would like them.  I will post pics when he installs them.





www.thebaitbar.com

[theBaitBar]

Here are some at night.  I can make any size or logo you need

[hpdi200]

Them look awesome. What do you do to make them light up.I know you use lights, but do you have to cut a section out of your trailer. I guess what I am asking is how to you install them ? Plus how much do they cost ?

[theBaitBar]

They cost $36 shipped.  On this trailer the owner had to cut out a section of the trailer and back light it.  Some trailers come with a cut out from the factory.  We can make dash plates, bait holders, any thing that can me made on a CNC router.

www.thebaitar.com

[JMackey98]

I have a challenge for you...make one that will fit over the existing trailer marker lighting with a tray so that you don't have to cut on the trailer. 

[theBaitBar]

What do you mean with a tray?

[fishinfranklin]

That wouldn't be hard if you have a metal brake. just make it a little taller and then put two 90 degree bends in it. rivtit or bolt it on.

[theBaitBar]

I can make these pan shaped if you wish.  The minimum bend would be about 3/4''

[JMackey98]

The reason I asked is that I have a galvonized trailer...didn't want to have to cut it.

[theBaitBar]

I wouldn't cut it either

[fishin couillon]

thats pretty neat....in order to install these you HAVE to cut on the trailer? Not to clear on installation.

[theBaitBar]

Some trailers already have some cut outs.  I know this customer did make the hole larger so all the image would light.

[fishbass04]

These will mount over the cut out on my trailer already right?

[theBaitBar]

They could.  But for better lighting cutting out the old lettering would be best.