Sonichub

Started by -Bryan-, February 11, 2011, 10:25:06 PM

Previous topic - Next topic

0 Members and 3 Guests are viewing this topic.

-Bryan-

OK, here's the deal.  Got the NMEA 2000 network up and running, install the Sonichub and the HDS unit picks it up (recognizes it) and I hear static from the speakers (HDS shows the FM station) but I get no audio menu on the HDS...any suggestions?  Everything is installed per Lowrance instructions...Just another "easy" install from Lowrance...NOTHING from them is "easy"... ~roflmao
Artificial intelligence is no match for natural stupidity...

BassBUFF

Do you have the latest software version installed? Just a thought.

Todd Driscoll

Bryan, is the HDS unit displaying the media bar panel at the bottom?  If not, go to Menu, Menu, Pages, and enable Audio.  Then, by holding/releasing Pages key to get the media bar panel as the active page, hitting Menu should pull up the audio menu.
Todd Driscoll - Garmin Pro Team

-Bryan-

Yes, the latest software is installed.  Yes, audio is enabled...from there I get no audio menu in the "pages" section...I do see the audio pane on the screen but have no access to it.  System doesn't give me an audio menu.
Artificial intelligence is no match for natural stupidity...

Todd Driscoll

Just like you would cycle active pages in split screen (map to sonar pane) by holding PAGES key, same deal with accessing the audio pane at bottom.  Unit treats it just like the other pages on the screen.  Hold PAGES key until unit cycles the active page to the audio bar at bottom of screen.  Once the audio bar is "active" (orange border around the bar), then the MENU key will access the SonicHub menu.
Todd Driscoll - Garmin Pro Team

-Bryan-

Thanks, Todd, it worked.  Sure wish they would think about moving that "Page Buton" part to the setup portion of the manual instead of the "about" part...maybe a more logical order of events, like right after you "enable audio"...But at least it works and I'm happy about that.  I do appreciate your help.
Artificial intelligence is no match for natural stupidity...

Ron Fogelson

Quote from: Todd Driscoll on February 12, 2011, 10:04:31 AM
Just like you would cycle active pages in split screen (map to sonar pane) by holding PAGES key, same deal with accessing the audio pane at bottom.  Unit treats it just like the other pages on the screen.  Hold PAGES key until unit cycles the active page to the audio bar at bottom of screen.  Once the audio bar is "active" (orange border around the bar), then the MENU key will access the SonicHub menu.

As always great support, thanks for all the great help here Todd  ~c~