Plugging the GPS Module Hole in the rear deck carpet???

Started by ungotz, October 07, 2009, 07:54:10 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

ungotz

I am looking for some ideas which will best fix the upgrae. I decided to put the HDS 5 in the boat and it has an external antennae so I will be removing the white puck on the rear deck. They drilled about a half inch hole through the carpet and deck to get the connector through. Any ideas on how to plug that hole and make it look good.
Thanks

E5Zero

Look at Lowes or Home Depot, in the hardware area the large drawers of miscellaneous stuff will have some snap-in plugs that should fit.  I would pick up a couple since one will get lost at some point!
2013 Phoenix 721 ProXP - Merc 250 Pro XS - Motorguide Digital 109
Humminbird 1199c - 1198c - Dual Power Poles
PB Largemouth - 9.51 - Toledo Bend - March 2014

ungotz

Quote from: E5Zero on October 07, 2009, 03:09:10 PM
Look at Lowes or Home Depot, in the hardware area the large drawers of miscellaneous stuff will have some snap-in plugs that should fit.  I would pick up a couple since one will get lost at some point!

E5,
Just wanted to thank you for the advice. I went to Lowes and sure enough they had an entire bin of nylon plugs with every size. Picked up a 7/8 and 1 inch which I thought it might beand the 1 inch was an exact fit. Looks great.
Thanks again.

E5Zero

Man glad I could be of help.  Between UB and a handful of other sites I have found the past couple of years, it is always nice to help out since I have received more than my fair share of help and advice.
2013 Phoenix 721 ProXP - Merc 250 Pro XS - Motorguide Digital 109
Humminbird 1199c - 1198c - Dual Power Poles
PB Largemouth - 9.51 - Toledo Bend - March 2014