MinnKota

Started by tillerybass, May 09, 2009, 02:29:03 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

tillerybass

I just bought 2 new 12 volt batteries for the trolling motor and after I got them all hooked up the trolling motor would not work. There is power going into the foot control from the batteries. Not sure what is wrong.
Thanks

Sc Bassin

Which Minn Kota do you have?

tillerybass


traveler

Are you sure you have them wired in series, positive to negative etc, 24 volts to the motor. Both batteries fully charged??  Circuit breaker pushed in and stays in.
2004 201ProXL DC,  2008 250HO E-Tec
2004 3500 Dodge Diesel,1999 Montana f/w.
Retired and fun to go

tillerybass

I am sure about all of those things except for the last one. I have no idea where the curcuit breaker is located. My manual says nothing about one either. My guess is that it is in the foot pedal?
Thanks

JavelinR20

I had the same problem with my 101 a few years back, turned it on and the prop spun about 1 turn and quit.  the circuit board in the pedal burnt up, you may also lookd at the switch under the round button you put your foot on, sometimes it gets pushed all the way down.