How to remove cooler/daybox

[Dnkpro]

Not sure how to remove this. I'm currently re carpeting and buffing the boat and don't know how to remove it. It's the center piece down low.


Sent from my iPhone using Tapatalk Pro

[Mike Cork]

Most are part of the top cap and would have to be cut out. However that looks to be something that was installed afterward.

Is it carpeted on the inside? If so, see if you can remove the carpet, looking for screws. There are only a couple options, screwed, bolted, glued/epoxied.

[Dnkpro]

Posted in wrong thread. Got it figured out. Removed carpet on inside of rod boxes and found screws. 4 of the 6 were broke anyway.

Side note the carpet glue removal sucks and is for the birds.


Sent from my iPhone using Tapatalk Pro

[FD]

Posted in wrong thread. Got it figured out. Removed carpet on inside of rod boxes and found screws. 4 of the 6 were broke anyway.

Side note the carpet glue removal sucks and is for the birds.


Sent from my iPhone using Tapatalk Pro

Take a look at my Triton Rehab thread in Dock Talk.  There are some tips there but it still sucks...

CPF Lures Pro Staff
CPFLures.com

[Dnkpro]

Welp it's done. I'd say it turned out slightly above okay but not quite holy moly good. Definitely some learning curves at the end of this and it got better. That ultrex upgrade sure is amazing.


Sent from my iPhone using Tapatalk Pro

[Mike Cork]

I'd say it's closer to Holy Moly... Great boat and she's pretty too.

[Dnkpro]

Thank ya.


Sent from my iPhone using Tapatalk Pro