Curado 200k Tear Down?

[Hobbes]

I have not disassembled my Curado 200k reels yet; other than cleaning and re-lubing the spool bearings.
Would like to know if there is any thing I should pay very close attention to in the tear down or reassembly.
I know bearing questions get asked offend. I know the ceramic and other after market bearings will only make a little bit of difference on distance casting. Is there much difference in what they will do for casting light weights (3/16-1/4 oz. shakey head, light jigs, etc...) pitching or skipping under docks. Also; what is the difference in the Boca's between the ceramic orange seal and the shielded ABEC 7's?

[LgMouthGambler]

Do yourself a favor, change the 2 bearings out that support the pinion.

[Hobbes]

Can you recommend a brand or a good place to purchase these? Thanks

[LgMouthGambler]

Any place that sells bearings will do, RC companies...