Print Page - Follow up for FD's question about settings.

Title: Follow up for FD's question about settings.
Post by: Wayne P. on February 02, 2021, 11:14:57 AM

I went to this lake to scan a bridge someone told me about. The water was extremely muddy after a major rain event so on the way to the location, I had to use 455 kHz for Side Imaging to get some range since the MEGA frequency is so sensitive to particles and temp changes. When I got there and passed over the bridge, I knew some settings had to be changed to get any detail in those conditions. This is the first pass

(https://i.postimg.cc/tCCyYCMJ/S00226.png) (https://postimages.org/)

So to get the sharpest images takes the MEGA frequency which is too sensitive for those conditions without some filtering. I made a few passes doing some adjustments and was able to get this:

(https://i.postimg.cc/Y9yGZm5G/S00001.png) (https://postimages.org/)

(https://i.postimg.cc/QtMKfqyZ/S00006.png) (https://postimages.org/)

Title: Re: Follow up for FD's question about settings.
Post by: Wayne P. on February 02, 2021, 11:17:42 AM

The current and wind made it difficult to stay in position for 360 so this is the best I could get with that:

(https://i.postimg.cc/3N44TxhL/S00171.png) (https://postimages.org/)

Bass Fishing Forum

General Bass Boat Discussion => Bass Boat Electronics => Topic started by: Wayne P. on February 02, 2021, 11:14:57 AM