Text only | Text with Images

Bass Fishing Forum

General Bass Boat Discussion => High Performance Bass Boat => Nitro => Topic started by: KEN1980 on November 19, 2015, 05:01:47 AM

Title: Quick trim for a Nitro 929 CDX
Post by: KEN1980 on November 19, 2015, 05:01:47 AM
Righto my boat has landed ( 2005 Nitro 929 CDX ) & im more than happy with it though I have become accustomed to blinker trim/quick trim.
I can't work out where to bolt on the blinker trim though... There is a large rubber boot behind the wheel & on my old Z7 it was bolted to the hydraulic unit that this boat does not have there.
Is there any owners that can share a pic of the way there's are setup ?

Cheers Ken.
Title: Re: Quick trim for a Nitro 929 CDX
Post by: Mike Cork on November 19, 2015, 07:41:33 AM
I don't have a nitro nor have I looked into this situation on one. But wanted to through out there for thought, some boat manufacturers are using a very large band clamp to install the blinker trim. The clamp doesn't have to be very tight as it doesn't take much pressure to operate the blinker style trim.
Title: Re: Quick trim for a Nitro 929 CDX
Post by: KEN1980 on November 19, 2015, 03:02:27 PM
Thanks Mike , i will have a look at it today & see if that clamp idea will work.

I will also take some pics of the setup.
Title: Re: Quick trim for a Nitro 929 CDX
Post by: Mike Cork on November 19, 2015, 03:03:11 PM
keep us posted.
Title: Re: Quick trim for a Nitro 929 CDX
Post by: Nowsker on February 15, 2016, 05:02:31 PM
Still need a pic?
Text only | Text with Images